IP: 54.224.197.86  | Tuesday, 24th Oct 2017

Sensorcom

You are here: Home Products Analogue Wireless Earphones ICM-700

ICM-700

ICM-700

Standard miniature inductive wireless eaphone that will fit in either left or right ear with a circular faceplate.

 

Description

Standard miniature inductive wireless earphone that will fit in either left or right ear with a circular faceplate profile available in beige, mid brown or dark brown. The roll-top battery tray also functions as an on/off switch. These devices have a well defined generic anatomical profile to combine discretion and comfort with good audio intelligibility. The earphones have a replaceable wax guard system to eliminate problems caused by ear wax. A range of inductive neck loops and inductor packs are also available for these products.

Specification

  • Frequency Range: 300 - 5000Hz IEC118-1 (Testing method for Devices 
  • with Inductive Inputs) 
  • Distortion: Less than 3% 
  • Receiver: Magnetic 
  • Maximum Output Sound Pressure Level: 115 dB ±2dB 
  • Battery: 1.4VDC A10 Zinc Air or Equivalent 
  • Minimum Operating Voltage: 1.1VDC 
  • Typical Battery Life: (A10 Zinc Air) >80 Hours depending on use 
  • Sensitivity 78dB@2kHZ - 10mA/M 
  • Amplifier: Customised hybrid 
  • Weight: (including battery) 1.5 grams 
  • Wax Filter Type: Replaceable Mesh Filter 
  • Operating Temperature Range: -10°C to 40C 
  • CE: Conformity 89/336/EWG-Electromagnetic Compatibility

Contact Us

Sensorcom Ltd.

London, BR3 4LZ, 

United Kingdom

Tel: +44 (0) 208 639 4440

Fax: +44 (0) 208 639 4442

E-Mail: info@sensorcom.com 

 

The MEL Group

Laurence Walter House

Addison Road, Chilton Ind. Est,


Sudbury, Suffolk


CO10 2YW, UK

logo

BSI registered

Holds Certificate No: FM 561435 and operates a Quality Management System which complies with the requirements of ISO 9001:2008 for the following scope:

The design, manufacture, repair and supply of audio communication devices, assisted listening devices and a range of associated products and accessories.

 

The “end of life disposal” of electrical products  in an environmentally friendly way, is the responsibility of the Purchaser.